Gypsum Products

UN-COUPLING MEMBRANES.

Our Gypsum based levelling compounds eliminate the need for un-coupling membranes therefore reducing the installation time and overall cost.

GBLC PRIMER

Primer compatable with Gypsum Based Levelling Compound & Gypsum Based Tile Adhesive.



A specially formulated primer for use as a surface preparation to increase bonding on Anhydrite/Calcium Sulphate and OPC based floors. 
GBLC-PRIMER is especially effective in preparing the floors to accept GBLC & GBTA.
Improves floor/topping interface bonding.

PRODUCT ADVANTAGES

• Easy and quick to apply 
• Compatible with Anhydrite/Calcium Sulphate based screeds 
• Non-flammable 
• Low odour 
• Fast drying 
• High bond strength 
• Solvent free 
• Can be applied early (up to 85%RH)

Coverage rate- 4-7 m² per Ltr dependant on surface porosity.

Visit our Catalogue/On Line Shop

GBLC GYPSUM BASED LEVELLING COMPOUND

A high quality, self smoothing compound used for levelling uneven floors in preparation to recieve most types of floor covering including vinyl, carpets, tiles and linoleum. Recomended min thickness 3mm

Our Gypsum based levelling compound is compatable with Lafarge Gyvlon: Cemex Superflow: Bardon's Highflow and all other types of Calcium sulphate screeds.

Coverage rate- 1.25kg per m² at 1mm

Visit our Catalogue/On Line Shop

 GBTA GYPSUM BASED TILE ADHESIVE

Specifically formulated for use on Calcium sulphate screeds and is ideal for interior use. On this type of screed it is particularly effective at higher floor relative humidity (up to 85%) where opc based adhesives may delaminate. Gypsum based tile adhesive is NOT recomended in areas subject to continuous wetting such as showers, wet rooms and swimming pools.

Our Gypsum based tile adhesive is compatable with Lafarge Gyvlon Calcium Sulphate Screed.

Coverage rate- 1.33kg per m² at 1mm

Visit our Catalogue/On Line Shop 

 GB FLO GYPSUM BASED SCREED -BAGGED GYPSUM BASED FLOOR SCREED

GB FLO bagged screed, when added to the requisite amount of water produces a flowing screed that requires minimal dappling for a smooth and level surface to SR2 of BS 8204:2 2003.

GB FLO is designed using a quality Gyvlon anhydrite binder combined with specially selected 0-4 mm aggregates. The screed can be used to prepare a wide variety of sub floors to receive tile, carpet, resilient flooring, wood flooring and many types of surface finishes.

Coverage rate- 2kg per m² at 1mm

Visit our Catalogue/On Line Shop

 Our manufacturing facility is certified to BS EN ISO 9001:2008

Interested in becoming a stockist for the above products? Please contact us on 01772 335435 to discuss further.